Detected Gas: | Oxygen(O2), Combustible Gases(EX/LEL), Carbon Monoxide(CO), Hydrogen Sulfide(H2S) | Measure Range: | O2: 0-30%VOL, EX: 0-100%LEL, CO: 0-1000PPM, H2S: 0-200PPM |
---|---|---|---|
Sampling Method: | Built In Pump | Detection Principle: | Catalytic Combustion/Infrared Ray(LEL), Electrochemistry(O2 CO H2S) |
Install Method: | Wall Mounted&Pipe&Flow-type&Confined Space | Display: | 2.4-inch Color Display, Resolution 320*240 |
Power Supply: | 12-24V DC | Signal Output: | 4-20mA&RS485&Inner Relay&External Relay |
Material: | Die-cast Aluminum Case | Explosion Proof Construction: | Ex D IIC T6 Gb, IP65 |
Highlight: | H2S Flammable Gas Detector,Toxic Flammable Gas Detector,12V Multi Gas Detector |
Online Four in One Toxic Gas Detector for Pipe with Pump CO H2S O2 CH4 Combustible Gas
YT-95H-B series is a built-in pump-suction multi gas detector, which can detect 1-6 kinds of gases at the same time, continuously monitor the concentration of various gases online for 24 hours.
Use a 2.4-inch high-definition color screen to display the on-site concentration in real time, and output 4-20mA, RS485 Standard signal, transmit data remotely.
YT-95H-B series is with advanced circuit design, mature kernel algorithm processing, obtained a number of software work patents and appearance patents.
YT-95H-B series can detect gas concentration in pipelines, confined spaces,and atmospheric environments, and can also detect gas leakage.
The instrument has a built-in constant flow and large suction pump,which is accurate in detection, and has a faster and more sensitive response than diffusion models.
When the target detected gas is lighter than air,no need to install at high place, which can get the detection results quickly and safely.
With internal suction pump, fast response
With a built-in constant flow and large suction pump, which
is accurate in detection, and has a faster and more sensitive
response than diffusion models.
Can detect multiple gases, multiple numerical display
Up to 6 kinds of gases can be detected at the same time. In complex and multi-gas environments, multiple installations can be reduced, saving time and effort.
2.4-inch industrial-grade high-definition color screen with a resolution of 320*240 and a wide viewing angle of 120 degrees.
Supports ppm, mg/m3, μmol/mol display units. Units can be switched arbitrarily, and the concentration value is automatically converted by the device.
Can support wireless transmission (optional)
With optional wireless module, data can be uploaded to the cloud platform, environmental protection bureau or other platforms, providing SMS reminder function, the transmission signal is not limited by distance, and can be viewed in real time on mobile phones and computers.
With strong anti-interference, data is reliable
Can resist strong magnetic interference. Data is guaranteed to be stable and reliable in areas with strong magnetic products or densely populated areas such as tunnels, mines and confined spaces.
Powerful function, multiple transmission signals and output
With full software automatic verification function and zero calibration function, making gas monitoring more accurate and more reliable.
Standard 4-20mA current signal, RS485 digital signal, 1 set of relay signal output, optional 2 sets of relay signal.
Standard infrared remote control, which can remotely control the detector and modify the detector settings.
With sound and light alarm function, there is sound and light alarm when reaching the alarm point.
For the harsh environment with high temperature, high humidity and high dust, a pretreatment system can be selected to cool down, dehumidify and remove dust to protect the service life of the detector.
Online Four in One Toxic Gas Detector Specification
Sampling method | Built in pump | ||
Pump flow rate | 0.35-0.5 L/Min | ||
Gas detected |
Oxygen(O2), Combustible gases(EX/LEL), Carbon monoxide(CO), Hydrogen sulfide(H2S) |
||
Detection principle |
Catalytic combustion/Infrared Ray(LEL), Electrochemistry(O2 CO H2S), sensor and ic are imported from UK, fast response and high precision |
||
Install method |
Wall-mounted, piping type, flow-type (according to the detected environment) |
||
Measure range |
O2: 0-30%VOL/0-25%VOL, EX: 0-100%LEL/0-100%VOL, CO: 0-500ppm/0-1000PPM/0-2000ppm, H2S: 0-100ppm/0-200PPM(Measure range is optional) |
||
Resolution |
O2: 0.01%VOL, EX: 1%LEL/0.01%VOL, CO: 0.1ppm/1PPM/1ppm, H2S: 0.01ppm/0.1PPM |
||
Precision |
≤± 2% FS |
||
Signal output |
4-20mA, RS485, 1 set of relay output; 1-5VDC(optional), 2 sets of relay output(optional) |
||
Response time |
≤10S |
Recovery time |
≤10S |
Repeatability |
≤±1% |
Linearity error |
≤±1% |
Zero shift |
≤±1%(FS/year) |
Display |
High-light nixie tube display |
Connection mode |
G1/2 external thread explosion-proof flexible pipe |
Unit |
ppm, mg/m3, g/m3, %LEL, %VOL |
Temperature |
-20 to 50°C |
Humidity |
0-95%RH |
Explosion-proof |
Ex d IIC T6 Gb |
Degree of protection |
IP65 |
Alarm |
Sound, light |
Operating time |
24H |
Dimensions |
286*202*96mm (H x W x D) |
Weight |
3.4kg (3.8kg with alarm light) |
Applications for Four in One Toxic Gas Detector
Biogas factory, Garbage station, Wastewater treatment, Air quality, Chemical industry, food factory, software engineering, environmental protection, animal husbandry, mining, power engineering, etc.
Furniture, Floor, Wallpaper, Coating, Gardening, Interior Decoration and Renovation, Dyestuff, Papermaking, Pharmacy, Health Care, Foodstuff, Antiseptic.
Disinfection, Chemical Fertilizer, Resin, Adhesive, Pesticide, Raw Material, Sample, Technological Process,
Livestock Farm, Refuse Processing Plant, Perm Place.
Bio-pharmaceutical Plant, Green Household, Livestock Breeding, Green House Cultivating, Warehouse Logistics, Brewing And Fermentation, Agricultural Production.
At present, we have cooperated with Coca-Cola Company, Nestle, State Grid Administration, Samsung, HuaWei, etc.
Contact Information
Celia Wu
Mobile/WhatsApp/Wechat: +86 15889417475
Email: sales04@szyuante.com