|Detected Gas:||Phosphine PH3||Measure Range:||0-5ppm, 0-10ppm,0-20ppm,0-50ppm,0-100ppm,0-200ppm,0-500ppm,0-1000ppm, 0-2000ppm.|
|Install Method:||Wall-mounted, Piping-type, Flow-type||Power:||12-36Vdc|
hazardous gas monitors,
air monitoring equipment
Explosion-proof Fumigation Gas Detector PH3 gas residual monitor
Application areas are granary, container fumigation, pest control company, environmental protection company, food industry, etc. PH3 gas detector can help users to know Phosphine level and it can protect workers in order to avoid being poisoned.
Wall-mounted, piping type, flow-type (according to the detected environment)
0-5ppm, 0-10ppm,0-20ppm,0-50ppm,0-100ppm,0-200ppm,0-500ppm,0-1000ppm, 0-2000ppm.
0.001ppm, 0.01ppm, 0.1ppm, 1ppm
≤± 1-2% FS
4-20mA, 0-5V, RS485, relay(optional)
High-light nixie tube display
G1/2 external thread explosion-proof flexible pipe
-20 to 50°C
Degree of protection
1. Monitor the Phosphine PH3 gas in environment or pipeline.
2. With self-calibration and zero calibration function, makes the detection more accurate and reliable.
3. With temperature compensation, this is able to realize gas concentration compensation under conditions of different temperatures.
4. Infrared ray controller can remote control alarm point settings, zero calibration, and address modification. (optional)
5. Can output one or two on-off signals, can drive ventilator or solenoid valve and other external devices. (optional)
6. Working Voltage:24V DC
7. Case: die-cast aluminum
8. Standard equipped with three-wire system 4-20mA analog output; relay output; RS485 output.
9. Unique infrared ray control function, which can non-contacted control the device.
10. Being compatible with all kinds of controlled alarms, PLC, DCS and other control system, can be remote monitored.
11. Explosion-proof design, fast, reliable and stable.
12. Explosion-proof grade: Ex dⅡCT6
13. With self-calibration function, and three standard keys will be used to realize on-site maintenance.
14. Detachable probe/gas cell: It is very easy to calibrate and replace sensor.
Petroleum and petrochemical, chemical, smelting, iron and steel, coal, thermal power, pharmaceutical scientific research, pharmaceutical production workshop, tobacco company, environmental monitoring, school research, building construction, fire alarm, sewage treatment, industrial gas process control, boiler room, waste treatment plant, Tunnel construction, oil pipelines, gas stations, overhaul of underground gas pipelines, indoor air quality testing, safety protection in hazardous areas, aerospace, military equipment monitoring, etc.
Q1. Can it applied to other gases?
A: YT-95H series can detect a wide range of gases, but one device is designed for one gas.
Q2. What is your minium order?
A: Sample order of 1 set for chacking quality is welcome
Q3. What about the lead time?
A: We usually deliver the goods in 2-5 working days after the order confirmed.
Q4. How is the calibration been done?
A: To keep the high sensitivity, please calibrate it at least once a year .
Q5. Is it OK to print my logo on the gas detector?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q6. How to contact us?
A: Please send your enquiry to us, we will reply you without delay.